Front Seat Stripdown

Laurel has finished sewing the front passenger seat fabric so it was time to totally strip the vinyl and foam off the seat.
Start with this (this is actually the drivers seat but you get the idea).

Remove the vinyl then strip of the foam.

 

Then take a wire wheel to the frame and give it a rust converter treatment. I was surprised how much rust there was in the upper section tubing.

I'll give it a coat of black enamel tonight ready for the foam when we pick it up this week.

We spent a few hours attempting to get the rear seat back foamed up and finished but now realise that we need to put a bit more thought (and foam) into the contouring of the seat. I'll try to get some action shots as we do it.