Front Seat Diaphragm Mounted

Last night saw the last two aluminium fillers drilled and in place. I'll have to pad it under the front piece of aluminium as it hits the springs when you sit on it and we don't want rattles. Otherwise it looks like it will work fine.

Closer...

The orange bits you see are orange heatshrink that I have placed over the ends of the four springs that support the front of the seat base. They used to have some kind of fabric over the ends so I figure something is required. The orange was the most durable that I had left over from the electric stuff.

Next - the webbing for the back. I discovered last night that there are actually seven webbing strap holes down either side of the back of the seat. I realised this when I was counting the remaining wire clips (same as you see in the above picture) - there were 14 left. Fortunately I bought plenty of webbing and extra webbing clips.