This blog documents the restoration, and conversion, of a 1965 Humber (Singer) Vogue to a fully electric vehicle.
The Vogue will be powered by an 11kW(modified), 3 phase industrial AC motor, controlled by an industry standard Variable Speed Drive (VSD) or Inverter.
To be able to produce the 400 volts phase to phase the VSD will need about 600 VDC of batteries.
A big thanks to the contributors on the AEVA forum: http://forums.aeva.asn.au/forums/
Friday, March 1, 2013
Pack #2 fixed
I built a new BMS monitor board, cleaned the underside with an aerosol cleaner for PCBs (at work) and sprayed it with a copper and brass laquer I had at home. Pack #2 is reassembled and back in the car.
No comments:
Post a Comment