This blog documents the restoration, and conversion, of a 1965 Humber (Singer) Vogue to a fully electric vehicle. The Vogue will be powered by an 11kW(modified), 3 phase industrial AC motor, controlled by an industry standard Variable Speed Drive (VSD) or Inverter. To be able to produce the 400 volts phase to phase the VSD will need about 600 VDC of batteries. A big thanks to the contributors on the AEVA forum: http://forums.aeva.asn.au/forums/

Monday, July 16, 2012

Drivers Seat Finished

We clipped up the upholstery on the drivers's seat  - a job we thought would take about an hour but took 6 hours. The mistake we made was leaving it so long since we did the passenger front seat.
This picture is just as we were fitting the lower part.

No comments: