This blog documents the restoration, and conversion, of a 1965 Humber (Singer) Vogue to a fully electric vehicle. The Vogue will be powered by an 11kW(modified), 3 phase industrial AC motor, controlled by an industry standard Variable Speed Drive (VSD) or Inverter. To be able to produce the 400 volts phase to phase the VSD will need about 600 VDC of batteries. A big thanks to the contributors on the AEVA forum: http://forums.aeva.asn.au/forums/

Monday, March 12, 2012

Rear Seat upholstery glued down, Driver's side window in

Actually gluing the upholstrey down under the silver section was another job we really didn't want to do. It turned out fine. I couldn't get good pictures and I think I'll wait until they are in the car to get better ones.
I fitted all the bailey channel, outside weatherstrip and the inside felt strip. The window regulator (winding mechanism) isn't in yet but the window slides nicely.
There's glass in that door!

No comments: